FIBER Master DT fiber laser cutting machine with shuttle tables
Double the table, double the productivity, zero downtime.
Advanced fiber laser cutting machine for steel plates with an automatic shuttle table system and a fully enclosed housing
The FIBER Master DT is a fiber-based steel plate laser cutter with two shuttle tables (Dual Table), available in power ratings from 3 to 30 kW and in formats up to 2500 × 6000 mm. BOCHU cutting heads and FSCUT controllers ensure a tolerance of ±0.05 mm at speeds of up to 130 m/min. As a result, automatic table changes take only seconds—eliminating downtime and increasing efficiency by 50%. In addition, a fully enclosed CE-compliant enclosure with smoke and collision sensors ensures safety and reduces noise levels in the workshop.
Match the size to your production profile with three available variants: 1500 x 3000 mm, 2000 x 4000 mm and 2500 x 6000 mm.
Automatic replacement of material tables eliminates downtime and increases effective cutting time by up to 50%, guaranteeing full utilization of laser power on each shift.
A wide range of power options allows you to select a fiber laser cutter suitable for both thin parts and heavy plates—up to 30 mm with the 12 kW model—while maintaining high edge quality and minimal unit cost.
High axis speeds significantly reduce travel times, which in series production translates into shorter cycles and faster lead times.
The reinforced design and dynamic servos ensure accuracy of ±0.05 mm and repeatability of ±0.03 mm, even with rapid changes in direction.
Certification according to 2006/42/EC, 2014/30/EU, ISO 17916, and related regulations facilitates technical acceptance with international customers and guarantees consistent quality.
Choose the optimal laser power for your production
Our machines are available in various power configurations, allowing you to precisely tailor the cutting technology to the specific needs of your industry and the types of materials you process. Below, we present the most popular laser source configurations and the laser cutting thickness ranges for structural steel and stainless steel. The selection of a fiber laser cutter’s power depends on the type of material, steel plate thickness, and expected productivity.
3 kW
Raycus Global Standard 3000 W
| Source power | 3000 W |
|---|---|
| Structural steel Material thickness | Production: 15 mm Max: 20 mm |
| Stainless steel Material thickness | Production: 8 mm Max: 10 mm |
| Cutting head | BOCHU BLT310 |
| Power adjustment range | 300 - 3000 W |
| Dimensions | 485 × 172 × 727 mm |
| Weight | < 55 kg |
| Cooling | Water |
| Supply voltage | 400 V ± 10% AC |
6 kW
Raycus Global Standard 6000 W
| Source power | 6000 W |
|---|---|
| Structural steel Material thickness | Production: 20 mm Max: 25 mm |
| Stainless steel Material thickness | Production: 15 mm Max: 18 mm |
| Cutting head | BOCHU BLT421 |
| Power adjustment range | 600 - 6000 W |
| Dimensions | 485 × 172 × 802 mm |
| Weight | < 80 kg |
| Cooling | Water |
| Supply voltage | 400 V ± 10% AC |
12 kW
Raycus Global Standard 12000 W
| Source power | 12 000 W |
|---|---|
| Structural steel Material thickness | Production: 30 mm Max: 35 mm |
| Stainless steel Material thickness | Production: 20 mm Max: 25 mm |
| Cutting head | BOCHU BLT442 |
| Power adjustment range | 1200 - 12000 W |
| Dimensions | 560 × 1344 × 1157 mm |
| Weight | < 250 kg |
| Cooling | Water |
| Supply voltage | 400 V ± 10% AC |
This feature is available only on the FIBER Master DT and FIBER Master HD cutters
Discuss solutions for your business
Do you have questions about the machine, or would you like to find out how our technology can work in your production process? Contact us—we’ll advise you, prepare a quote, and answer all your questions.
Choose the most convenient way to contact us
+48 76 741 40 20
Discover the price of the FIBER Master DT laser cutter
Want to know the cost of a FIBER Master DT laser cutter configured to your needs? Fill out a short form—based on your answers, we’ll prepare a personalized quote. If you don’t know all the parameters, provide approximate values—our consultant will help select the best solution and present detailed pricing, including for non-standard configurations.

FIBER Master DT Fiber Laser Cutter — Optimizing Steel Plate Cutting Time and Costs
The FIBER Master DT is a fiber laser cutting machine that combines precise cutting of steel plates with high productivity. Shuttle tables in the Dual Table system and automatic maintenance of operating parameters allow you to carry out complex projects with consistent part quality and lower unit costs. Intuitive operation reduces operator training time, and the robust construction ensures a long service life for the machine. View our full lineup of laser cutting machines or get help selecting a CNC machine for metal cutting.
Dual Table System
Imagine a steel plate laser cutter that doesn’t waste a single minute during loading or unloading of the material. Thanks to the innovative, automatic table-changing system in the FIBER Master DT, your production takes on a whole new level of efficiency. While the laser is cutting precisely on one table, the operator can safely unload the finished parts and prepare the next sheet on the other table. Once cutting is complete, the tables swap automatically, and the machine immediately begins working on the new job—without unnecessary downtime or wasted time.
This solution allows you to increase effective working time by up to 50%, which translates into higher productivity, faster order fulfillment, and real savings. The automated process minimizes the risk of errors and improves workplace safety. Choose technology that eliminates downtime and helps your company stay ahead of the competition.

A new standard in precision and reliability
The most important advantages of BOCHU heads
- Versatility without compromise - from the lightweight BLT310 to the industrial BLT682, the same family of heads supports lasers from 3 kW to 30 kW in 2D cutting.
- Instant autofocus —a closed-loop system with an accuracy of less than ±10 µm maintains perfect focus with every change in material thickness.
- Full process monitoring - sensors for collision, lens temperature and working gas pressure operate in real time, protecting equipment and reducing the risk of downtime.
- Service in 5 minutes - a retractable optical cassette allows the lens to be replaced without disassembling the head or recalibrating the optical system.
- Reflection resistance – AR+HR coatings and the Anti-Burn-Back system in the BLT462 and BLT682 models protect the optics when cutting heavy plates and highly reflective materials.
- Lowest TCO - modular design, longer component life and minimal wear and tear on consumable parts result in the lowest total cost of ownership.

Raycus Laser Source
FIBER Master DT works with Raycus fiber laser sources from 3 to 30 kW. Advantages of the fiber laser:
- 30-40% electro-optical efficiency - lower energy consumption and operating costs.
- Full operational readiness within seconds - no warm-up, unlike CO₂ lasers.
- No mirrors or moving optical parts - minimal maintenance.
- Consistent beam quality throughout the service life, without frequent calibration.
- Long service life of the laser modules - stable parameters for years, without costly replacement of optical components.
- Compact source that takes up little floor space.
- Versatility - cutting a wide range of materials and thicknesses while maintaining edge quality.

Fully enclosed design
In a fiber laser cutting machine, operator safety is not an afterthought, but an integral part of the machine’s design. The FIBER Master DT operates within a fully enclosed housing that isolates the cutting area from the workshop and protects against laser radiation, process light, spatter, fumes, and moving machine parts.
- Certified safety windows for safe process monitoring and camera viewing—without opening the work area,
- lockable doors, guard locks, and access control to the work area,
- fume extraction and dust removal, and noise reduction in the hall,
- Operating and maintenance modes are selected with a key—in maintenance mode, the machine does not initiate the cutting process.
The most important rule: the safety system takes precedence over the CNC control system —in the event of a hazard, it forces the machine to react, regardless of the program and process settings. The design complies with the requirements applicable to machines in the European Union (including Directives 2006/42/EC and 2014/30/EU, as well as standards PN-EN ISO 17916, 12100, 60204-1, and 14120), which facilitates CE certification.
As a manufacturer of CNC metal-cutting machines, STIGAL delivers a complete, safe machine designed as a single unit. You can read more about the role of the protective enclosure and operator safety in the post: “Safe Fiber Laser in an Enclosed Housing.”
Check the detailed data and compliance of FIBER Master DT with the most important industry standards
| Available working areas: |
|
|---|---|
| Available laser sources: |
|
| Laser power stability: |
|
| Max. traverse speed: |
|
| Positioning accuracy: |
| Control system: |
|
|---|---|
| Work table: |
|
| Machinery Directive |
|
|---|---|
| Electromagnetic Compatibility (EMC) Directive |
|
| Safety of thermal cutting machines |
|
| Safety of machinery - General principles for design |
|
| Safety of machinery - Electrical equipment of machines |
|
| Safety of machinery - Guards |
|
| Numerical control of machines |
|
| Thermal cutting |
|
| Acceptance tests for oxy-fuel cutting machines - Reproducible accuracy |
|
STIGAL Technology in Practice—Sample References
Versatile applications across various industrial sectors
STIGAL solutions are effective across many industries—from machine manufacturing and steel structures, through the marine and energy sectors, to the automotive and logistics industries. Our equipment enables precise cutting, weld preparation, and the execution of custom projects. Thanks to their flexible configurations and high productivity, STIGAL machines support both mass production and custom orders in the most demanding environments. The large-format FIBER Master HD laser cutter is ideal for the largest workpieces, while tube and profile lasers are designed for cutting tubes and profiles.
Steel Structures
Cutting structural steel plates into components for industrial buildings, roofs, load-bearing columns, gusset plates, mounting plates, and brackets. The FIBER Master DT allows you to quickly and precisely prepare steel plate parts for weld preparation and assembly.
Shipbuilding and Offshore Industries
With its precise laser cutting of steel plates, cladding panels, steel sections, reinforcements, and structural components, the FIBER Master DT is ideal for shipbuilding, offshore platforms, and marine installations — including thicker steel plates with higher laser power.
Energy
The machine is ideal for cutting steel plates for load-bearing structures, heat exchanger housings, panels, and industrial system components—anywhere where precision and repeatability of steel plate parts are essential.
Knowledge and Inspiration for Modern Manufacturing
See more inspiration, tips, and news related to cutting technology and production automation. Find out what else can help streamline operations at your company.
We'll help you choose the right software for your machine
Contact our technical advisor, and we'll help you select the perfect tool for your machine fleet and cutting processes.
Choose the most convenient way to contact us
+48 76 741 40 20
Frequently Asked Questions — FIBER Master DT
The FIBER Master DT is a fiber laser cutting machine with a dual, interchangeable shuttle table (Dual Table system). While the laser is cutting on one table, the operator unloads and loads the other—the automatic table change increases effective cutting time by up to 50%. The machine is available in power ratings from 3 to 30 kW and in formats up to 2500 × 6000 mm.
Depending on the power of the source: 3 kW - structural steel up to 20 mm and stainless steel up to 10 mm; 6 kW - steel up to 25 mm and stainless steel up to 18 mm; 12 kW - steel up to 35 mm and stainless steel up to 25 mm; 30 kW - structural and stainless steel up to 50 mm. Production thicknesses are slightly lower, and the final selection depends on the material and the desired edge quality.
The price depends on the configuration: laser source power, work area size, automation, and additional options. Use the “Get Pricing” machine configurator on this page or contact the STIGAL team —we’ll prepare a personalized quote for you.
It depends on the primary materials, steel plate thickness, batch size, and expected productivity. For more information, see our guide: What fiber laser power should you choose—3, 6, 12, or 30 kW?
Yes. The design complies with, among others, Directives 2006/42/EC and 2014/30/EU, as well as the standards PN-EN ISO 17916, PN-EN ISO 12100, PN-EN 60204-1, and PN-EN ISO 14120, which facilitates CE technical approvals.
Yes. As a Polish manufacturer, we provide technical support and service for CNC machines, and the purchase of a laser cutter can be financed through a lease—we work out the details on a case-by-case basis.











