FIBER Tube 3C laser cutting machine for tubes and structural sections

Laser precision in tube and section cutting - maximum material utilization

The FIBER Tube 3C is a fiber laser for tubes and profiles, designed for maximum precision, speed and versatility. It cuts tubes, profiles and structural sections - including I-beams - which makes it a proven I-beam cutting laser for steel structures. It is also ideal for series production and custom projects, delivering top cut quality and minimal waste.

Discover the FIBER Tube 3C

15,000 mm

maximum length of material infeed and outfeed

18,000 kg

machine weight in the 3-chuck configuration

2D / 3D

straight cutting or cutting with simultaneous bevelling

up to 500 mm

tube diameter and section size (3C version)

The FIBER Tube 3C is a compact laser cutting machine for steel tubes and structural sections, equipped with a modern 3, 6, 12 or 20 kW laser and a precise BOCHU cutting head. Automated loading and unloading minimizes downtime, and advanced software ensures easy operation and full process control. The machine delivers precise cuts with minimal waste, maximizing material utilization. It is the ideal choice for companies that value productivity, repeatability and safety.

Production capabilities

Types of processed sections

Tube
Hollow section
I-beam
Channel section
Angle section
Laser-cut profiles with perforations and cut-outs - STIGAL FIBER Tube 2C/3C
2C and 3C versions

Cutting parts up to 15 meters long - two or three chucks

Grow your production and take on projects that require processing exceptionally long parts. The FIBER Tube 3C design allows cutting material up to 15 meters long with diameters and section sizes up to 500 mm. The machine is available in the 2C (two chucks) and 3C (three chucks) versions.

FIBER Tube 3C - tube and profile laser in the three-chuck version, cutting parts up to 15 m

Cutting capabilities for tubes, profiles and structural sections

Machine versionTube working range [mm]Section working range [mm]
2C (two chucks)Ø10 - Ø9010 - 90
2C (two chucks)Ø15 - Ø12015 - 120
2C (two chucks)Ø15 - Ø16015 - 160
2C or 3C (two or three chucks)Ø15 - Ø23015 - 230
2C or 3C (two or three chucks)Ø20 - Ø28020 - 280
2C or 3C (two or three chucks)Ø40 - Ø35040 - 350
3C (three chucks)Ø50 - Ø50050 - 500

Heavy Duty design

The machine is built on a reinforced structure that weighs 18,000 kg in the 3-chuck configuration. The mass limits vibration and ensures repeatable production.

Waste depends on the number of chucks

In the 2-chuck version, the remnant is approximately 100 mm, while the 3-chuck version allows zero-waste cutting.

3D bevel cutting (option)

Simultaneous cutting and bevelling in the range from -45° to +45° shortens the preparation of parts for welding.

Configured for your production

The FIBER Tube 3C can be designed to the individual needs of your production, including other loading and unloading lengths.

FIBER Tube 2C with automatic tube loading via support belts

2C version with automatic loading via support belts

Semi-automatic or automatic loading and unloading speeds up work and increases operator safety. The 2C version is available with automatic material loading via support belts.

Order a laser cutting sample package

Check the quality and precision of the FIBER Tube 2C/3C on your own materials

Wondering how our solutions will meet your requirements?
Order a laser cutting sample package and see for yourself what perfect quality and machining accuracy look like.
Fill in the form below and we will prepare a free sample package for you.

Order a free sample package

See the FIBER Tube machine in action

A new dimension in structural section processing

The FIBER Tube system means fast processing of hollow sections and tubes directly on the laser cutting machine. It replaces drilling, milling and sawing with one fully automated operation that guarantees consistent repeatability. Thanks to advanced cutting dynamics, you get clean edges without further machining, which shortens production time by tens of percent. The solution makes complex parts possible and, in the configuration with a 3D head, also allows precise edge bevelling for welding.

STIGAL FIBER Tube laser head cutting a steel tube
Hollow section with holes cut on the STIGAL FIBER Tube tube and profile laser
Hollow sections with holes and press-fit joints, laser-cut on the FIBER Tube
Tube and profile samples laser-cut on the FIBER Tube - intersections, holes and bevels
Structural sections with arc cut-outs after cutting on a tube and profile laser
Steel tubes with laser-cut intersections prepared for welding
Frame made of press-fit hollow sections, cut on a STIGAL laser
Profiles and angle sections with holes after laser cutting on the FIBER Tube
Laser cutting of a hollow section with sparks on the STIGAL FIBER Tube machine
Laser cutting of a steel profile with sparks on the STIGAL FIBER Tube machine
Hollow sections with a laser-cut STIGAL logo and press-fit ends
Configure your requirements

Get the price of the FIBER Tube 2C/3C laser cutting machine

Would you like to know how much a FIBER Tube laser cutting machine costs in a configuration tailored to your needs? Fill in a short form - based on your answers, we will prepare a personalized price quote. If you do not know all the parameters, enter approximate values - our advisor will help you choose the best solution and present the details of the quote, also for machines in non-standard configurations.

Get pricing
Match the power to your needs

Choose the optimal laser power for your production

Our machines are available in various power variants, so you can precisely match the cutting technology to your industry and the materials you process. Below are the most popular laser source configurations and the cutting thickness ranges for structural and stainless steel.

3 kW

Raycus Global Standard 3000 W

Laser source power3000 W
Structural steel

Material thickness

Production: 15 mm*

Max: 20 mm*

Stainless steel

Material thickness

Production: 8 mm*

Max: 10 mm*

Cutting headBOCHU BLT310
Power adjustment range300 - 3000 W
Dimensions485x172x727 mm
Weight<55 kg
CoolingWater
Supply voltage400V ± 10% AC

*The values given refer to flat material cutting. For structural sections with variable wall thickness, the values may differ.

6 kW

Raycus Global Standard 6000 W

Laser source power6000 W
Structural steel

Material thickness

Production: 20 mm*

Max: 25 mm*

Stainless steel

Material thickness

Production: 15 mm*

Max: 20 mm*

Cutting headBOCHU BLT421
Power adjustment range600 - 6000 W
Dimensions485x172x802 mm
Weight<80 kg
CoolingWater
Supply voltage400V ± 10% AC

*The values given refer to flat material cutting. For structural sections with variable wall thickness, the values may differ.

 

12 kW

Raycus Global Standard 12000 W

Laser source power12,000 W
Structural steel

Material thickness

Production: 30 mm*

Max: 35 mm*

Stainless steel

Material thickness

Production: 25 mm*

Max: 30 mm*

Cutting headBOCHU BLT442
Power adjustment range1200 - 12000 W
Dimensions560×1344×1157 mm
Weight<250 kg
CoolingWater
Supply voltage400V ± 10% AC

*The values given refer to flat material cutting. For structural sections with variable wall thickness, the values may differ.

 

20 kW

Raycus 20,000 W

Laser source power20,000 W
Cutting thicknessesavailable on request
Cutting headavailable on request
Talk to our expert

Let's discuss solutions for your company

Do you have questions about the machine or want to find out how our technology will perform in your production? Contact us - we will advise you, prepare a quote and answer all your questions.

Consult an advisor
STIGAL technology

Solutions that optimize production time and costs

STIGAL machines stand out for their cutting precision, the ability to cut bevels and chamfers, and automatic maintenance of operating parameters. Innovative 3D heads and advanced control systems make it possible to carry out complex projects, ensuring high part quality and reliable operation even in the most demanding production tasks. Intuitive operation makes operator onboarding easier, and the robust design guarantees a long service life. This is how STIGAL supports the growth of modern industrial plants.

Inside the cutting chamber of the FIBER Tube 3C machine
Real savings

Maximum material utilization

In conventional tube and profile cutting systems, even a small remnant after each cycle can add up to significant losses across the whole production. In the FIBER Tube 3C, minimal waste results from a movable chuck that travels exceptionally close to the cutting head - so the end of the stock, which usually goes unused, is reduced to an absolute minimum. In addition, two self-centering chucks clamp the material securely and allow precise positioning, which means a repeatable process and optimal use of every batch of material.

Synchronized chuck operation eliminates play and shifting, ensuring that every part is cut exactly where it should be. Keep in mind, however, that the minimum remnant depends on the material geometry, the cutting path and the machine configuration - you will achieve the best results when the right process conditions are met. This approach not only lowers material costs but also supports sustainable production and makes job planning easier.

BOCHU cutting heads for 2D and 3D laser cutting
Precise cutting with a bevelling option

Precision and flexibility in one machine

High cut quality and repeatability are the result not only of precise mechanics but above all of advanced cutting head technology. The FIBER Tube 3C uses a BOCHU head with an autofocus system. It automatically adjusts the focus to the thickness and type of material, eliminating manual adjustment and maintaining consistent cut quality. In addition, integrated sensors monitor operating parameters in real time, minimizing the risk of failures and downtime.

The optional bevelling function allows simultaneous cutting and weld edge preparation in the range from -45° to +45° (V, Y and K bevels possible), which significantly shortens machining time and eliminates additional operations. The modular head design allows quick lens replacement, and mechanical collision protection and resistance to high power ensure a long service life and low operating costs. It is a solution that genuinely increases production flexibility and lets you carry out even the most demanding projects.

Raycus laser source in the STIGAL fiber laser cutting machine
Technology

Raycus laser source

The FIBER Tube 3C works with Raycus fiber laser sources rated at 3, 6, 12 or 20 kW. Advantages of the fiber laser:

  • Electro-optical efficiency of 30-40% - lower energy consumption and operating costs.
  • Ready to work in a few seconds - no warm-up as with CO₂ lasers.
  • No mirrors or moving optical components - minimal maintenance.
  • Stable beam quality throughout the service life, without frequent calibration.
  • Long service life of the laser modules - stable parameters for years, without costly replacement of optical components.
  • Compact source that takes up little floor space.
  • Versatility - cutting various materials and thicknesses while maintaining edge quality.
Infeed hopper for the tube feeder in the STIGAL FIBER Tube laser cutting machine
Automated loading and unloading

Stability, repeatability and full process control

Time-consuming and error-prone manual loading is a common problem on conventional production lines. The FIBER Tube 3C solves it with semi-automatic feeders equipped with advanced sensors that continuously correct the position of tubes and profiles, eliminating the risk of collision and speeding up preparation for cutting.

Two self-centering chucks play a key role here - their synchronized rotation eliminates runout, and stable clamping dampens vibration, which is especially important for long and thin-walled parts. The movable chuck can travel very close to the head, reducing material losses, and the universal jaws handle a wide range of structural sections, ensuring production flexibility. As a result, operators can focus on quality control and optimizing the machine's work, and the whole line runs faster, safer and more economically - which means lower costs and higher quality of finished products.

Legend
Material loading zone into the cutting chamber
Material storage and feeding zone
Technical specifications and standards

Check the detailed specifications of the FIBER Tube 3C and its compliance with key industry standards

Customer Reviews

STIGAL Technology in Practice—Sample References

From steel construction to shipbuilding to automotive component manufacturers—STIGAL CNC machines for laser, plasma, and gas cutting are used in dozens of industries, boosting production productivity and reducing material waste through intelligent nesting. As a Polish manufacturer, we prioritize reliability, service support, and the flexible customization of machines to meet individual needs—and our customers’ reviews speak volumes about this.
SEACOM - logo

One of the challenges we face is to optimize production, reduce production costs, (...) An important purchase is a STIGAL cutter, which speeds up the production process and gives better quality to our products.

Waldemar LussaSEACOM S.A.
JB Stal Serwis

Thanks to STIGAL's machinery, we can provide our customers with good, proven goods on time. If we are forced to increase our production capacity, we will probably turn to STIGAL's offer again.

Tomasz WiniarskiJB Stal Serwis Sp. z o.o.
Konstruktion

Equipment, allows us to realize the technological process at least three times faster. (...) feed 1000, gives us a 3-fold increase in speed and with two machines we can realize our entire production.

Zygmunt GazdaKonstruktion

At every stage of the project, STIGAL demonstrated a professional approach, expert technical advice, and efficient organization of the implementation process

Grzegorz WichłaczKONSTAL PLESZEW Sp. z o.o. Sp. k.
Service in numbers

We don't leave our customers on their own

95%

of service requests resolved remotely

15 min

average response time of the service department

30 h

average travel time of our own service fleet

same day

shipping of parts from a stock of thousands of wear parts

A STIGAL service technician in a service vehicle with wear parts

When you choose a STIGAL machine, you get certified safety solutions and full after-sales support. Every minute of downtime is a real cost, which is why we take responsibility for keeping the delivered machine running - regardless of how complex the problem is.

Complete installation
Safe transport, assembly and precise calibration of the machine at the customer's plant.

Operator training
Certified training at the customer's site or remotely - also for new employees when the team changes.

Remote diagnostics
We resolve most questions and day-to-day technical issues immediately via a remote connection to the machine.

In-house service
A team of experienced service technicians and a fleet of service vehicles with spare parts on board.

Relocations and overhauls
Moving the machine to a new hall, overhauls and ongoing maintenance - quickly, with minimal downtime.

More about STIGAL service
Advanced control software

Full control over production and ease of operation

Modern control software provides full control over the cutting process, production optimization and convenient, safe operation - regardless of the operator's experience level.

Control station with tube cutting software - STIGAL FIBER Tube

Full control and precision in tube cutting

TubePro is advanced control software for machines cutting steel tubes and profiles. It gives the user full control over the cutting process by automatically detecting the tube center, optimizing parameters and ensuring safe operation. With TubePro, production becomes faster, more precise and repeatable, and operators can easily manage even complex jobs.

TubePro V4 tube cutting software on the screen of the STIGAL FIBER Tube cutting machine

Intelligent optimization and nesting of profiles - TubesT

TubesT is intelligent software for nesting and designing parts from tubes and profiles. It lets the customer make the most of the material by automatically arranging parts and generating optimal cutting paths. TubesT simplifies production preparation, minimizes waste and supports even the most complex projects, saving time and costs.

Industries where our machines work

Versatile use across industrial sectors

STIGAL solutions prove themselves in many industries - from machine building and steel structures, through the marine and energy sectors, to automotive and logistics. Our machines enable precise cutting, weld preparation and custom projects. Thanks to flexible configuration and high productivity, STIGAL machines support both series production and individual orders in the most demanding environments.

Steel structure under construction - steel construction and building industry

Steel construction

Production of industrial halls, canopies, load-bearing columns, railing elements and steel stairs - wherever steel profiles and tubes are used. The FIBER Tube 3C allows fast and precise preparation of components for welding and assembly.

Ship at sea - shipbuilding and offshore industry

Shipbuilding and offshore

Advanced capabilities for angled cutting of tubes and profiles, cutting holes and preparing tubular joints make the FIBER Tube 3C a fit for building ships, drilling platforms and offshore installations.

Towers and steel structures in the energy sector

Energy

The machine is ideal for prefabricating process piping, load-bearing structures, heat exchanger casings and transmission system components - wherever precision and repeatability matter.

About us

STIGAL - manufacturer and integrator of cutting technology

We are a Polish manufacturer of CNC machines and integrated industrial systems. We have been operating continuously since 2006 and have completed over 800 installations in Poland and Europe, including Germany, Denmark, the Czech Republic and Italy. Our own R&D department and project-based approach to every installation allow us to take on unusual tasks - one of our machines works 600 meters underground, in compliance with strict mining regulations.

We build large-format laser machines as well as plasma and oxy-fuel cutting machines entirely at our facility in Poland.

  • CNC cutting machines, including large-format ones, for sheet metal, tubes, profiles and structural sections - laser, plasma and oxy-fuel
  • Robotic cutting and welding lines with storage systems, shuttle tables and part transport systems
  • Integration of industrial robots and cobots with preparation, assembly and welding, including large-scale structures
  • Multi3D bevelling systems - 3- and 5-axis heads for cutting with simultaneous weld edge preparation, also for complex intersections
  • In-house CNC control systems and CAD/CAM software for cutting machines and robotic applications
  • Special projects, including machines for operation in unusual conditions
Related articles

Knowledge and inspiration for modern manufacturing

Discover more inspiration, tips and news on cutting technology and production automation. See what else can streamline work in your company.

+
FIBER Master 3D 30 kW at Metalchem Kościan
FIBER Master 3D – a laser sheet metal cutter has been delivered to Seacom Metalchem in Kościan Another STIGAL project has been...
Continue Reading
+
Cutting tubes, profiles, and structural sections on a single CNC machine
The production of components made from tubes, profiles, and structural sections is rarely uniform. A single facility may produce thin-walled hollow sections,...
Continue Reading
STIGAL employees celebrate their success
+
Another success! Cutting and bevel cutting profiles up to 12 m for a shipyard.
In recent weeks, our company has reached the next level of evolution in the field of industrial technology. We are thrilled to...
Continue Reading
+
Power Consumption of Fiber Laser Cutters and the Energy Efficiency of Raycus Laser Sources
The power of the laser source is not the same as the amount of electricity consumed by the machine. A 12-, 20-,...
Continue Reading
Contact

Let's talk about your production

We will match the machine configuration to your materials, thicknesses and production scale. We will prepare a quote, show you the machine in operation, carry out a test cut on your material and prepare a free set of cutting samples.

Consult an advisor