Looking for a plasma cutting machine for sheet metal, but not sure which model and configuration to choose? You do not have to define all the parameters yourself. Just write to us or call and tell us about your current production, needs and expectations. Our specialists will help you choose the right machine and explain which solutions will work for your tasks. You can also contact us if you are not yet sure which product or technology will be right.
At STIGAL, we do not leave customers alone with choosing a machine. Together we analyse the production requirements and, on that basis, select the table format, plasma power source, head and other equipment. Below we explain what we take into account and why individual elements of the configuration matter.
We design and manufacture complete CNC plasma cutting machines. The power source with the torch is part of a system that also includes the machine frame, the material table, the drives, the control and properly selected equipment. Such a configuration combines high cutting quality with repeatable parts and efficient work organisation.
Table format: match the working area to your sheets and parts
Choosing the table is best started by checking which sheets arrive at the plant most often and what the dimensions of the largest parts produced are. What counts is the usable working area, that is, the area in which the machine can perform the planned cut.
When choosing, consider:
- the formats of the sheets you buy and of the largest parts,
- the arrangement of parts on the sheet,
- the possibility of using remnants from previous orders,
- the weight and thickness of the sheets and the required table load capacity,
- how sheets are loaded and cut parts are removed.
A larger working area can make it possible to lay out several sheets or to cut long parts without splitting them. This matters, among other things, in the production of steel structures and shipbuilding components. However, enlarging the table should follow from specific needs: order sizes, work organisation and the planned development of the plant.
You also need to distinguish the dimensions of the working area from the space required for the whole workstation. In the hall, plan space for the machine, its operation, material handling and service access. If the plan is to load one part of the table while cutting in the other, such work organisation requires a configuration and safeguards that allow the zones to be safely separated.
Our specialists help translate these requirements into a specific table format and workstation layout, taking the conditions in your plant into account.
Plasma power source output: what should you really compare?
When choosing plasma for sheet metal cutting, the question of power often comes up. In practice, one of the basic parameters for selecting a power source is the cutting current, given in amperes. It should not be confused with the electrical power consumption of the whole machine.
However, the maximum current alone is not enough to assess production capabilities. The type of material, the sheet thickness, the torch used, the process gases and the parameters of the specific process also matter.
Select the power source for your most frequent orders
The starting point should be the thickness range that dominates in daily production. It is also worth defining the share of thicker sheets, the required output and the geometry of the parts, especially the number of holes and small contours.
A larger current range can provide additional production capabilities, but it does not mean that every part should be cut at maximum current. The parameters and consumables are selected for the given task based on technology tables.
Distinguish edge start cutting from piercing
When comparing power sources, check separately:
- the recommended production cutting range (for the expected quality and output),
- piercing capability, important when cutting starts inside the sheet,
- the ability to start cutting from the edge, which may allow thicker material to be processed.
The maximum severance thickness does not yet tell you how the machine will produce a series of parts with many holes. That is why it is best to base the power source selection on sample drawings and the actual production plan. At STIGAL, we help assess these requirements and select the power source for the parts you produce. You do not have to resolve all the technical dependencies yourself.
Check the time needed to produce the whole part
Output is affected not only by the torch travel speed during cutting. Piercing, rapid moves between contours, machine dynamics and loading and unloading also matter.
When comparing configurations, the most useful figure is the time needed to produce a representative part or a whole sheet. It gives a better picture of the workstation capabilities than a single cutting speed value.
2D or 3D head: when is bevel cutting needed?
The choice of head depends above all on what is to happen to the part after cutting. If production covers flat parts without planned bevels, a 2D cutting configuration may be suitable. When edges need to be prepared for welding, it is worth considering a 3D head.
2D head for cutting contours
In a 2D configuration, the torch works perpendicular to the sheet surface. This solution is used to cut outer contours, holes and cut-outs in sheets.
The selection should take into account the required geometry and tolerances of the parts. Torch height control is also important, as it helps maintain the right process conditions on the sheet surface.
3D head for edge preparation
A 3D head allows controlled tilting of the torch and cutting bevels during cutting. This can reduce the need to move the part to a separate bevelling workstation.
Such a solution is worth analysing especially when edge preparation for welding is a regular production step. The benefit should be assessed on the basis of the whole process: cutting time, additional machining, transport of parts and preparation for assembly.
When choosing a 3D head, check the required angles, bevel types, material thicknesses and the capabilities of the CAD/CAM software. The head and the power source should be selected together: when cutting at an angle, the arc travels a longer path through the material than in perpendicular cutting. Parameters suitable for 2D cutting therefore do not necessarily provide the same working range during bevel cutting.
Complete CNC plasma cutting machine: what else should you consider?
The table, power source and head form the basis of the configuration, but the result depends on how all machine systems work together. A stable frame, drives, CNC control and torch height control support smooth process control and repeatable results.
The workstation design should also include fume extraction and filtration, utility connections and safety systems. We equip STIGAL machines with solutions that protect the operator and ensure safe operation of the work zone, selected for the machine design and the way it is used.
For plants that also process very thick plates of non-alloy steel, it is worth considering a plasma/oxy-fuel configuration. An additional oxy-fuel torch extends the technological capabilities of the workstation. Its selection should follow from the materials and thicknesses in your production.
Our support also covers implementation and operation of the machine. At STIGAL, transport and training are included in the price, and after the purchase we provide technical support and access to consumables.
How do you choose a plasma cutting machine with the help of STIGAL specialists?
The first step can simply be a conversation. You do not need to know the model name, specify a particular power source or have a ready specification. Tell us what you currently produce, what you want to improve and what tasks the new machine should perform. Our specialists will help organise the requirements and explain the available options.
Helpful for the selection are:
- material grades and the most frequently processed thicknesses,
- sheet formats and the dimensions of the largest parts,
- batch sizes and the expected output,
- requirements for holes, edges and tolerances,
- the need for bevel cutting and preparing parts for welding,
- the available hall area and the way sheets are transported.
If you have sample part drawings, it is worth sending them. However, you do not have to prepare all the data before the first contact. During the conversation, we will determine what information is needed to select the configuration.
We will take into account both your current production and planned changes in the plant. We will explain the reasons for the proposed table format and the choice of power source and head to help you make an informed decision.
Looking for a plasma cutting machine for sheet metal or not yet sure which machine will be right?
Write to us or call. Tell us about your needs and we will help you choose a solution. At STIGAL, you can count on support from the first conversation, through machine selection and implementation, to its daily operation.
Contact the STIGAL teamFAQ: choosing a plasma cutting machine for sheet metal
No. It is enough to tell us about your current production, needs and expectations. Our specialists will help define the requirements, explain the differences between solutions and propose a suitable configuration of a complete CNC machine.
The working area should allow the planned parts to be produced from the sheets you use. In addition to the dimensions, check the load capacity of the table and the access during loading.
No. The current, the consumables and the other parameters must match the type and thickness of the sheet. Greater power source capabilities can extend your production range, but they do not replace correct process selection.
Not always. Piercing capability and the edge start cutting range are separate parameters. For parts with holes, pay particular attention to the ability to start cutting inside the sheet.
When parts regularly require bevel cutting, for example before welding. Cutting bevels on the machine can reduce additional operations and the transport of parts between workstations. STIGAL specialists will help you assess whether such a solution will be useful in your production.



