Plasma cutting machine for metal: which metals and thicknesses can it cut? Table

STIGAL SteelCut 3D CNC plasma cutting machine with controller and CEBORA plasma power source

A plasma cutting machine for metal can cut structural steel, stainless steel and aluminium. The thickness range depends on the plasma power source used, the material and how the cut is started. That is why, when choosing a machine, it is worth checking both the piercing capability and cutting started from the edge of the sheet.

You do not have to select all the parameters yourself. At STIGAL, we help match a complete CNC machine to the needs of your plant. Just tell us about your current production, the materials you use and the expected output. Our specialists will help define the right configuration.

Which metals can be plasma cut?

Plasma cutting uses an electric arc and a jet of ionised gas that melts the material and removes it from the kerf. The technology is used to process electrically conductive metals.

In industrial production, it most often covers:

  • Structural steel, also called mild steel, used to produce welded structures, machine parts, brackets and load-bearing elements.
  • Stainless steel, including suitable grades of acid-resistant steel, used among other things in tanks, installations and industrial equipment.
  • Aluminium and its alloys, used in lightweight structures, transport components and machine parts.

However, being able to cut a given metal does not mean that the same settings are used for all materials. The type of gases, the current and the cutting speed are selected for the specific grade and sheet thickness.

Plasma cutting machine for metal: cutting thickness table

Below we present the maximum thicknesses given in the STIGAL overview for three selected CEBORA plasma power sources. Distinguishing how the cut is started helps you better assess their suitability for the planned parts.

MaterialPlasma power sourceMaximum thickness with piercingMaximum thickness with edge start
Structural steelPROF 180 HQC40 mm60 mm
Structural steelPROF 300 HQC50 mm80 mm
Structural steelPROF 420 HQC50 mm80 mm
Stainless steelPROF 180 HQC30 mm50 mm
Stainless steelPROF 300 HQC35 mm60 mm
Stainless steelPROF 420 HQC40 mm80 mm
AluminiumPROF 180 HQC25 mm40 mm
AluminiumPROF 300 HQC30 mm50 mm
AluminiumPROF 420 HQC40 mm80 mm

The table describes the capabilities of the listed power sources, not a uniform working range of every STIGAL cutting machine. The parameters of a complete machine have to be matched to its configuration, the type of material, the part geometry and the expected quality. The maximum thickness is also not information about production output at that thickness.

Cutting with piercing versus starting from the edge

Cutting with piercing means that the process starts inside the sheet. The torch first makes a hole through the full thickness of the material and then moves along the programmed path. This method is needed, among other things, when cutting holes and parts arranged on the surface of the sheet.

Edge start cutting begins at the edge of the material. In this case, the torch does not have to make an initial pierce through the full thickness of the sheet. As a result, a given power source can cut thicker materials than when starting inside the sheet.

For example: the ability to cut an 80 mm plate from the edge does not automatically mean that holes can be made in it by direct piercing. That is why, when choosing a machine, it is worth showing not only a list of thicknesses but also sample part drawings.

What else besides thickness determines the choice of machine?

A CNC plasma cutting machine should above all match the tasks performed regularly. Maximum thickness is one of the criteria, but the time needed to produce a part, repeatability and the requirements of further processing are equally important.

Most frequently cut materials and thicknesses. If most orders involve one range of sheets, this is the range for which the machine output should be assessed. Occasional orders for much thicker parts should be considered separately.

Current and process parameters. The current range of the power source affects its capabilities, but it does not replace technology tables. For a given material, the gases, consumables, torch height and feed rate also have to be selected.

Part geometry. Long, straight contours place different demands than small cut-outs and numerous holes. The information that a machine will cut a sheet of a given thickness does not yet describe whether it can produce all the details of a design.

Edge bevelling. When cutting at an angle, the arc travels a longer path through the material than in perpendicular cutting. The working range of a 3D head should therefore be determined separately, taking the required bevel into account.

Sheet format and weight. A complete plasma cutting machine must have a suitable working area and a table adapted to the sheets processed. The loading method, fume extraction and the workstation layout also matter.

When is it worth combining plasma with oxy-fuel cutting?

If a plant processes structural steel across a wide range of thicknesses, a plasma/oxy-fuel cutting machine can be the solution. It lets you use plasma for suitable production tasks and an oxy-fuel torch for very thick steel parts.

The STIGAL range includes configurations that allow oxy-fuel cutting up to 320 mm. This is the range of the oxy-fuel technology, not of plasma, and it depends on the chosen solution. Standard oxy-fuel cutting should also not be treated as a replacement for plasma when processing aluminium and stainless steel.

The choice of technology is best based on real parts and the cost of producing them. At STIGAL, we analyse production needs and help determine whether the right solution will be plasma, a plasma/oxy-fuel configuration or a fiber laser cutting machine.

Looking for a plasma cutting machine for metal that fits your production?

Write to or call STIGAL. You do not need to have chosen a model or a power source. Together we will define the requirements and select a complete CNC machine.

Talk to STIGAL specialists

Frequently asked questions about plasma cutting of metal

Yes. Both materials can be plasma cut once the right power source and process have been selected. The permissible thicknesses vary depending on the material and the configuration.

There is no single value that applies to all machines. You need to check the parameters of the specific power source, the type of metal and how the cut is started. The requirements for quality and working speed should be assessed separately.

Yes, provided the right process is selected. With thin sheets, the part geometry, heat input control and the expected accuracy are particularly important. It is worth comparing plasma and laser on the basis of specific parts.

Yes. However, a change of material may require different gases, consumables and settings. Parameters for structural steel should not be transferred automatically to aluminium or stainless steel.

The most useful are the material grades and thicknesses, sheet formats, sample part drawings and the expected production volume. It is also worth indicating whether bevel cutting is needed and which operations follow cutting.